DT 7800-154: Call Point Illuminated Button, Single, Composite, Braille, Tactile

• Alarm call button with tactile lettering and Braille
• Illuminated call button with activation delay
• Activation delay to reduce false alarms, when used with a local reset or alarm controller
• No PSU required, usually driven by a local reset or alarm controller
• Steel backed brushed finished acrylic plate
• Braille + black tactile annotation
• Mounts in a standard UK, 35mm, single gang, back box
• Anti‑tamper fixings available on request

• Call Point Illuminated Button, Single Gang, Composite Brushed, Tactile Black
• Call Point Illuminated Button, Single Gang, Stainless Steel Brushed, Silk Screened Black
• Call Point Illuminated Button, Single Gang, Stainless Steel Brushed, Tactile Black
• Call Point Vandal Resistant Button, Single Gang, Mild Steel Painted White, Silk Screened Red

Our vandal resistant emergency assistance alarm range offers tough, cost‑effective, BS 8300‑2 and document M compatible systems suitable for public use. We supply stand‑alone alarms, multiple alarm systems with remote monitoring and combined systems with disabled refuge EVCS, building alarms, etc. For larger and smarter sites, we offer networked solutions with optional BMS interfaces. Ideal for hospitals, railway stations, hotels, airports and other public spaces.

Call point buttons offer an alternative to standard pull cord alarm activation points. Mutiple pull cords and call points can be combined together on the same alarm system to cover a wider area and increase alarm accessibility. Call points can be also used in locations where pull cords may not be appropriate.

This unit is an alarm call point with a single illuminated call button. The button illumination mimics the operation of the overdoor beacon to provide visual alarm state indication for the user.

The main PCB has screw terminals for easy cable connection and the entire assembly mounts in a standard UK, 35mm, single gang back box. Anti‑tamper fixings are available on request.

This alarm call point vandal resistant call point with an illuminated call button. To reduce the risk of accidental alarm activation the call button must be held for a minimum of 0.25 seconds before an alarm is activated. The button illumination mimics the action of the over‑door beacon giving the user a visual alarm state indication inside the alarm zone. The front panel is made from steel backed, brushed finish, acrylic panel stainless steel, annotated in black tactile lettering and Braille with the word Call. Other finishes and alternative annotation are available on request.

This unit is designed for mounting in a standard UK, 35mm, single gang back box, and is compatible with all Folknoll emergency assistance alarm systems.

• Disabled Toilet Alarm
• Combined Buildings Systems

• Emergency Assistance Alarm Products - Overview
• Disabled Toilet Alarm Products - Statement Of Conformity
• Alarm‑Strip Toilet System With Acknowledge - Overview
• Enhanced Toilet System With Remote Acknowledge - Overview