DT 7800-153: Call Point, Illuminated Button, Single, Composite, Brushed, Tactile

To improve customer experience and monitor performance, this website uses Folknoll Group and third‑party cookies. By continuing to use this website, you accept this practice.


  • Steel backed acrylic alarm call button with tactile lettering
  • Illuminated call button with activation delay
  • Activation delay to reduce false alarms, (when used with Folknoll reset/controllers)
  • Mounts in standard UK, 35mm, single gang back box
  • Anti‑tamper fixings available
  • Suitable for Folknoll emergency assistance alarm systems

Similar Products

Our Disabled Toilet Alarm Range

Our vandal resistant emergency assistance alarm range offers tough, cost‑effective, BS 8300‑2 and document M compatible systems suitable for public use. We supply stand‑alone alarms, multiple alarm systems with remote monitoring and combined systems with disabled refuge EVCS, building alarms, etc. For larger and smarter sites, we offer networked solutions with optional BMS interfaces. Ideal for hospitals, railway stations, hotels, airports and other public spaces.

Call Points

Call point buttons offer an alternative to standard pull cord alarm activation points. Mutiple pull cords and call points can be combined together on the same alarm system to cover a wider area and increase alarm accessibility. Call points can be also used in locations where pull cords may not be appropriate.

The DT 7800-153, Call Point, Illuminated Button, Single, Composite, Brushed, Tactile, Black

This unit is an alarm call point a single illuminated call button. The button illumination mimics the operation of the overdoor beacon and provide visual alarm state indication and reassurance to the user.

The main PCB has screw terminals for easy cable connection and the entire assembly mounts in a standard UK, 35mm, single gang back box. Anti‑tamper fixings are available on request.

This alarm call point vandal resistant call point with an illuminated call button. To reduce the risk of accidental alarm activation the call button must be held for a minimum of 0.25 seconds before an alarm is activated. The button illumination mimics the action of the over‑door beacon giving the user a visual alarm state indication inside the alarm zone. The front panel is made from steel backed, brushed finish, acrylic panel stainless steel, annotated in black with the word Call in tactile lettering. Other finishes and alternative annotation are available on request.

This unit is designed for mounting in a standard UK, 35mm, single gang back box, and is compatible with all Folknoll emergency assistance alarm systems.


Front panel
Acrylic, steel backed, brushed finish, black tactile lettering
Width: 86mm, height: 86mm, depth: <35mm (approx.)
Suitable for mounting in a standard UK, 35mm, single gang back box (not supplied)
12Vdc and 24Vdc versions available, please specify when ordering

Suitable for


Other Disabled Toilet Alarm Products -+

A complete list of Folknoll products in this range.

Care Sector Products -+

Nursing homes, retirement homes, assisted living residences, etc.

Buildings Sector Products -+

Factories, offices, hotels, stations, offices, schools and other public buildings.

Custodial Sector Products -+

Police stations, prisons, courts, secure hospitals, border agencies, etc.

Share this Page -+